CAE Software【Femtet】Murata Software Co., Ltd.

Murata Software Blog
JP EN
JP

Electric Analysis

Click on the exercise number to move on to the example page

The values mentioned in Notes are based on Femtet 32-bit edition with the following system.
CPU: Intel Core i7-3770 3.40GHz　Memory: 4.00GB
The values in Notes may vary depending on the version of Femtet and system.

Electric Analysis

1

Parallel-Plate Air-Gap Capacitor

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Voltage specified

Notes

  • The Number of Meshes 6755
  • Analysis Time 2sec
  • Maximum Memory Usage 56MB

2

Parallel-Plate Dielectric Capacitor

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Voltage specified

Notes

  • The Number of Meshes 10716
  • Analysis Time 3sec
  • Maximum Memory Usage 56MB

3

Capacitances across Multiple Electrodes

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Voltage specified

Notes

  • The Number of Meshes 9820
  • Analysis Time 3sec
  • Maximum Memory Usage 57MB

4

Floating Electrode’s Potential

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Voltage specified
Floating electrode

Notes

  • The Number of Meshes 15693
  • Analysis Time 3sec
  • Maximum Memory Usage 57MB

5

Electric Field Created by Point Charge

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Charge amount

Notes

  • The Number of Meshes 6781
  • Analysis Time 1sec
  • Maximum Memory Usage 71MB

6

Electric Field Created by Spherical Charge

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Charge density

Notes

  • The Number of Meshes 7629
  • Analysis Time 2sec
  • Maximum Memory Usage 72MB

7

Electrostatic Forces Applied on Dielectric Material

Setup Condition and Analysis Type

Static analysis (dielectric material)
Open boundary(Absorbing boundary)
Voltage specified

Notes

  • The Number of Meshes 7631
  • Analysis Time 2sec
  • Maximum Memory Usage 71MB

8

Electroplating(Hull Cell Test Bath)

Setup Condition and Analysis Type

Static analysis (conductor)
Plating analysis
Plating wall

Notes

  • The Number of Meshes 857
  • Analysis Time 3sec
  • Maximum Memory Usage 125MB

9

Plating Analysis(Plating a Device in the Bath)

Setup Condition and Analysis Type

Static analysis (conductor)
Plating analysis
Plating wall

Notes

  • The Number of Meshes 41512
  • Analysis Time 2min 51sec
  • Maximum Memory Usage 470MB

10

Hall Element Analysis

Setup Condition and Analysis Type

Static analysis (conductor)
Hall element analysis Options
External magnetic field
Voltage specified
Floating electrode

Notes

  • The Number of Meshes 926/2785
  • Analysis Time 3sec/4sec
  • Maximum Memory Usage 348MB/336MB

11

Conductor’s Resistance

Setup Condition and Analysis Type

Static analysis (conductor)
Voltage specified

Notes

  • The Number of Meshes 744
  • Analysis Time 0sec
  • Maximum Memory Usage 71MB

12

Periodic Boundary Condition

Setup Condition and Analysis Type

Static analysis (dielectric material)
Periodic boundary
Voltage specified

Notes

  • The Number of Meshes 1110
  • Analysis Time 0sec
  • Maximum Memory Usage 71MB

13

Anisotropic Dielectric Material

Setup Condition and Analysis Type

Static analysis (dielectric material)
Anisotropic permittivity
Voltage specified

Notes

  • The Number of Meshes 4618
  • Analysis Time 1sec
  • Maximum Memory Usage 71MB

14

Harmonic Analysis of Conductor in the Air

Setup Condition and Analysis Type

Harmonic analysis
Voltage Specified

Notes

  • The Number of Meshes 10619
  • Analysis Time 3sec
  • Maximum Memory Usage 933MB

15

Uneven Electric Field

Setup Condition and Analysis Type

Static analysis (dielectric material)
Voltage specified

Notes

  • The Number of Meshes 56786
  • Analysis Time 8sec
  • Maximum Memory Usage 114MB

16

Anisotropic Conductor

Setup Condition and Analysis Type

Static analysis (dielectric material)
Anisotropic conductivity
Voltage specified

Notes

  • The Number of Meshes 4618
  • Analysis Time 1sec
  • Maximum Memory Usage 71MB

17

Floating Capacitance

Setup Condition and Analysis Type

Static analysis (dielectric material)
Voltage specified
I/O Port

Notes

  • The Number of Meshes 31424
  • Analysis Time 9sec
  • Maximum Memory Usage 102MB

18

Electric Resistance Set on Boundary Face

Setup Condition and Analysis Type

Static Analysis (Resistance)
Electric Resistance Boundary

Notes

  • The Number of Meshes 2405
  • Analysis Time 1sec
  • Maximum Memory Usage 119MB

Stress Analysis・Electric Analysis

1

Displacement Caused by Electrostatic Force

Setup Condition and Analysis Type

Static analysis
Electrostatic force
Voltage specified

Notes

  • The Number of Meshes 1129
  • Analysis Time 1sec
  • Maximum Memory Usage 71MB

2

Capacitance Change by Thermal Expansion

Setup Condition and Analysis Type

Electric field: Static analysis (capacitance)
Voltage specified
Open boundary(Absorbing boundary)
Result import(Deformed shape)
Mechanical stress: Static analysis
Thermal load option

Notes

  • The Number of Meshes
  • Analysis Time
  • Maximum Memory Usage

3

Resistance Change by Deformation

Setup Condition and Analysis Type

Electric field: Static analysis (resistance)
Voltage specified
Result import(Deformed shape)
Mechanical stress: Static analysis
Displacement fixed
Forced displacement

Notes

  • The Number of Meshes
  • Analysis Time
  • Maximum Memory Usage
Back to Product