Property Name |
Notes |
| AdaptiveEnergyType |
Properties to judge the convergence in the adaptive meshing. |
| AdaptiveTol |
Accuracy of adaptive meshing. |
| AdaptiveTolPort |
Accuracy of adaptive meshing of port. |
| AutoAirMeshSize |
Mesh size of ambient air for automatic creation. |
| AutoAirScale |
Ambient air scale for automatic creation. |
| bAdaptiveMesh |
Whether to apply adaptive meshing. |
| bAdaptiveMeshAtRefFreq |
Applies adaptive meshing at reference frequency. |
| bAdaptiveMeshOnCurve |
Create adaptive meshes on a curved face. |
| bAutoAir |
Whether to create ambient air automatically. |
| bAutoCalcAutoAirMeshSize |
Whether to calculate automatically the mesh size of ambient air for automatic creation. |
| bAutoChangeBoundary |
The conductor bodies thicker than the skin depth constitute the boundary condition. |
| bAutoRemoveInterference |
Whether to perform the automatic intersection removal. |
|
bAutoSkinMeshDepth |
Automatic setting of the skin mesh thickness (only in the magnetic analysis) |
| bAutoSplit |
Sets the number of tessellations of the periodic curved face automatically. |
| bAutoThinSize |
Sets the thickness of the thin elements at the electrode's ends automatically. |
| bCalcAutoAirDeform |
Whether to calculate the deformation of automatically-created ambient air in the stress analysis. |
| bConnect |
Whether to perform automatic imprinting. |
| bCopyX |
Copies meshes symmetrically on the X=0 plane. |
| bCopyY |
Copies meshes symmetrically on the Y=0 plane. |
| bCopyZ |
Copies meshes symmetrically on the Z=0 plane. |
| bDifferentBoundX |
Changes the boundary condition of the copied meshes on the X=0 plane. |
| bDifferentBoundY |
Changes the boundary condition of the copied meshes on the Y=0 plane. |
| bDifferentBoundZ |
Changes the boundary condition of the copied meshes on the Z=0 plane. |
| bDualElement |
Whether to use the dual elements (creates dual elements). |
| bFinePort |
Whether to refine the port. |
| bHexaMesh |
Creates mixed meshes of hexahedral (rectangular) free meshes and sweep meshes. |
| bIsoParamElement |
Places on the curve of the middle nodes. |
| bLambdaDivision |
Whether to set the number of tessellations per wavelength. |
| bLayerCut |
Creates sweep meshes by cutting into layers. |
| bMeshG2 |
Whether to use Mesher G2 |
| bMiddleNode |
Whether to use the 2nd-order elements (middle nodes of the elements). |
| bMixMesh |
Creates mixed meshes of tetrahedral (triangular) free meshes and sweep meshes. |
| bMultiGrid |
Whether to use the MG method. |
| bPeriodMesh |
Whether to create the periodic mesh for rotating machinery |
| bRepair |
Whether to perform automatic recovery. |
| bResolutionMM |
Whether to set dimensional resolution to 1/1000 |
| bStructuredMesh |
Whether to create the equilateral triangular/square meshes |
| bSweepMesh |
Whether to apply sweep meshing |
| bThinMesh |
Whether to create the thin elements on the electrode's ends. |
| CondSurfaceType |
Surface treatment type for conductors (only in the magnetic analysis). |
| DivRatioSkinMesh |
Growth rate of the ski mesh (only in the magnetic analysis) |
| MesherType |
Meshing Method |
| MGTol |
Tolerance of the MG method. |
| MinLength |
Minimum length to ignore. |
| MinVolume |
Intersection volume to ignore |
|
nDivSkinMesh |
Division number of the ski mesh thickness (only in the magnetic analysis) |
| nElementIncRate |
Element incremental rate of adaptive meshing. |
| nElementIncRatePort |
Element incremental rate of adaptive meshing of port. |
| nGrid |
The number of grids of the MG method. |
| nLambdaDivision |
The number of mesh divisions per wavelength |
| nMaxAdaptive |
The maximum number of iterations of adaptive meshing |
| nMaxAdaptivePort |
The maximum number of iterations of adaptive meshing at the port. |
| nMG |
The maximum number of Iterations of the MG method |
| nMGElementIncRate |
Element incremental rate of the MG method. |
| nMinAdaptive |
The minimum number of iterations of adaptive meshing |
| nMinAdaptivePort |
The minimum number of iterations of adaptive meshing at the port. |
| nSplit |
The number of tessellations of the periodic curved face |
| RefFreq |
Reference frequency |
| ThinSize |
Thickness of elements at the electrode's ends. |
|
TotalRatioSkinMesh |
Multiplier of the skin depth for the total thickness (only in the magnetic analysis) |
