|
Home / Modeling / CAD Data Import/Export
CAD Data Import/Export
Femtet can import or export the following CAD data formats.
Supported Formats (Updated on April 1, 2024)
|
Format |
Import |
Export |
|
(.x_t,.x_b) |
Yes (up to 30.1) |
Yes (8.0 to 30.1) |
|
(.dxf) |
(Note 1) (R12 to 2000) |
Yes (2000) |
(Note 1) The DXF file import is not fully supported. Some forms are not importable.
Procedure
The Optional Formats (Updated on April 1, 2024)
The following formats can be imported/exported through an optional license package.
Please contact the support center if interested.
|
Format |
Import |
Export |
|
ACIS® (.sat, .sab) |
Yes (up to 2023) |
Yes (5.0) |
|
Autodesk® Inventor™ (.ipt) (.iam) |
Yes (up to 2024) |
No |
|
AutoCAD® - 3D (.dxf, .dwg) |
Yes (up to 2019) |
No |
|
CATIA® V4 (.model, .session, .div, .exp) |
Yes (up to 4.2.5) |
No |
|
CATIA® V5 (.CATPart, .CATProduct, .CATDrawing, .3DXML, .CGR) |
Yes (up to V5_6 R2023) |
No |
|
CATIA® V6 (.3DXML) |
Yes (Up to V5-6 R2019[R29]) |
No |
|
Creo™ Pro/ENGINEER® (.asm, .asm.*, .neu, .neu.*, .prt, .prt.*, .xas, .xpr) |
Yes (Pro/Engineer 19.0 to Creo 10.0) |
No |
|
I-deas (.mf1, .arc, .unv, .pkg) |
Yes (～13.x[NX 5], NX I-deas 6) |
No |
|
IGES (.igs, .iges) |
Yes (5.1, 5.2, 5.3) |
Yes (5.1) |
|
IFC (.ifc) |
Yes (IFC2x Editions 2, 3 and 4) |
No |
|
JT (.jt) |
Yes (up to 10.9) |
No |
|
PRC (.prc) |
Yes (All versions) |
Yes (Latest) |
|
Unigraphics® / NX (.prt) |
Yes (UG11 to UG18, UG NX, NX5 to NX12, NX1847 to NX2312 |
No |
|
Solid Edge (.asm, .par, .pwd, .psm) |
Yes (1 to 20, ST1 to ST10, 2019 to 2024) |
No |
|
SolidWorks® (.SLDASM, .SLDPRT) |
Yes (From 97 up to 2024) |
No |
|
STEP (.stp, .step) |
Yes (AP203 E1/E2, AP214,AP242) |
Yes (AP203 E2, AP214 E1, AP242 E1) |
|
STL (.stl) |
Yes (All versions) |
Yes |
|
VDA-FS (.vda) |
Yes (1.0, 2.0) |
No |
|
VRML (.wrl, .vrml) |
Yes (1.0, 2.0) |
No |
Handover of Property Names
* From Femtet to other CAD
The body attribute names will be handed over to the CAD as component names.
* From other CAD to Femtet
Based on [Import Dialog], the assembly names or component names assigned by other CAD are handed over to Femtet as body attribute names and material property names.
If a DXF file is imported, the layer name will be handed over to the body attribute/material property names of Femtet.
-
Please note the handover rule mentioned above might not be valid for all the CAD software.