Fatigue Life Tab

Analysis conditions for the fatigue life are set on this tab.

It is in the [Edit Material Property] dialog box. See [How to Set Body Attribute/Material Property].

The setting is for the fatigue life analysis by the stress solver.

The will show up if [Fatigue life assessment] is selected in the analysis condition.

Setting Item	Notes
Specifying Method	Apply the values specified for the analysis conditions	Applies coefficients of Manson-Coffin law's specified in the analysis condition of the fatigue life.
	Specify for each material property	Applies a coefficient of Manson-Coffin law’s to each material property.
Coefficient of Manson-Coffin Law's	Coefficient of Manson-Coffin Law's sets the coefficient of Manson-Coffin law's to calculate the life Manson-Coffin law Nf = C Δεne^n where Nf is the fatigue life (unit: cycles). Δεne is the equivalent inelastic strain amplitude (unit: %) [C] represents the fatigue life when the equivalent inelastic strain amplitude (Δεne) is 1%. An integer greater than 0 is acceptable. [n] is an influence parameter of Δεne. A negative real number smaller than 0 is acceptable. Refer to [Fatigue Life Assessment] of the Technical Notes for more details.