Home / Technical Notes / Magnetic analysis / Sign in the Table of Magnetic Transient Analysis

Sign in the Table of Magnetic Transient Analysis

The sign of output values in the table is listed below.

 

Positive Direction of Output Value

Value of Table	2D Analysis	3D Analysis
Circuit current	Direction of component in the external circuit	Direction of component in the external circuit
Voltage drop in the circuit	Direction of component in the external circuit	Direction of component in the external circuit
Interlinkage magnetic flux of coil	Direction of current (*1)	Direction of current (*1)
Induced voltage of coil	Direction of current (*1)	Direction of current (*1)
Inductance	Direction of current (*1)	Direction of current (*1)
Input current of coil	-Y direction on the window	Direction of current (*)

Note *1 Direction of coil

The direction is determined as follows.

• Direction of current set up on the [Current] tab of Body Attribute.

• Direction of power source in the external circuit.

• Direction of FEM coil in the external circuit.

• [Reverse Direction] flag of FEM coil in the external circuit.

• The signs of current and voltage, and phase settings are ignored.