Home / User Interface / Menus / Viewpoint Operation (Tool Panel)

Viewpoint Operation

List of Shift Viewpoint Menus of Viewpoint Operation Tool Panel

	Front View Switches to the front view. Used for 2D models.
	Back View Switches to the back view. Used for 2D models.
	Top View Switches to the top view.
	Bottom View Switches to the bottom view.
	Right View Switches to the right view.
	Left View Switches to the left view.
	Isometric View Switches to the isometric view.
	Drawing Plane View Switches to the current drawing plane view. Cannot be used during the drawing operation.
	Reversed View Switches to the reversed view. Cannot be used during the drawing operation.
	Straight View Switches the viewpoint to look at the selected face straightly. Cannot be used during the drawing operation.
	View by Numerical Entry Views the model from the entered view vector towards the coordinates origin. See the detail. Cannot be used during the drawing operation.
	Nonuniform Zoom Zooms in/out based on the scale factors set for each axis. See the detail. Cannot be used during the drawing operation.
	Rotate by Any Angle Rotates the viewpoint by the specified angle If this command is selected, the dialog box will appear. After setting the rotation angle (1 to 180 degrees), click each rotation button to rotate the viewpoint from the current state by the set angle. Rotate to right Rotate the viewpoint to the right by the specified angle around the viewing line. Rotate to left Rotate the viewpoint to the left by the specified angle around the viewing line. Rotate to right around vertical axis Rotate the viewpoint to the left by the specified angle around the vertical axis on the screen. Rotate to left around vertical axis Rotate the viewpoint to the left by the specified angle around the vertical axis on the screen. Rotate upward around horizontal axis Rotate the viewpoint upward by the specified angle around the horizontal axis on the screen. Rotate downward around horizontal axis Rotate the viewpoint downward by the specified angle around the horizontal axis on the screen.
	Rotate Viewpoint Rotates the viewpoint. If this command is selected, the mouse pointer will bear the rotate mark. By dragging the mouse, the view will be rotated. If topology is selected, the view will be rotated around its gravity center. If wire bodies or edge topologies are selected, the view will rotate around their vector. Right click the mouse to exit the command.
	Rotate around Viewing Line Rotates the view around the viewing line. If this command is selected, the mouse pointer will bear the rotate mark. By dragging the mouse, the view will be rotated. Right click the mouse to exit the command.
	Shift Viewpoint Shifts the viewpoint. If this command is selected, the mouse pointer will bear the move mark. By dragging the mouse, the model is shifted. The coordinates of the model will not change with this operation. Right click the mouse to exit the command.
	Zoom Zooms in or out. If this command is selected, the mouse pointer will bear the zoom mark. To zoom out, drag the mouse to left. To zoom inm drag the mouse to right. Right click the mouse to exit the command.
	Zoom in to Area Zooms in to the specified area. If this command is selected, the mouse pointer will bear the areal zoom mark. Specify the area, which will be blown up. Right click the mouse to exit the command.
	Synchronize All Viewpoints Synchronizes all windows viewpoints. Cannot be used during the drawing operation.
	Fit Fits all objects in the window.
	Fit Selected Objects Fits the selected objects in the window.
	Undo Viewpoint Operation Undoes the viewpoint operation. Cannot be used during the drawing operation.
	Redo Viewpoint Operation Redoes the viewpoint operation. Cannot be used during the drawing operation.
	Register Registers the current viewpoint. See Viewpoint Management for the detail. Cannot be used during the drawing operation.
	Delete Removes the registered viewpoints. See Viewpoint Management for the detail. Cannot be used during the drawing operation.
	Import Imports the viewpoint data. See Viewpoint Management for the detail. Cannot be used during the drawing operation.
	Export Exports the viewpoint data. See Viewpoint Management for the detail. Cannot be used during the drawing operation.