Display

Solver

Indicates the solvers used and other information.

Mode

Indicates the analysis type.

The number at the initial is the index.

By clicking [Move Mode Backward] or [Move Mode Forward], display sequence of the modes can be changed.

Field

Specifies the field to display.

Component

Specifies the field component to display.

Phase

Selects the phase to display. See [How to Examine the Results of Harmonic Oscillation] for the details.

Scale
Specifies the scale for the contour and vector diagrams.

Select either Linear or Log.

Switch Object
Switches the object type to select. See [How to Switch the Object Type to Select] for more information.

Field Superposition Setting

Sets the superposition of fields. See the detail.

Area Selection

Toggles the way to select objects in the specified area. See [How to Switch the Object Type to Select] for more information.

Move Mode Backward

Returns to the previous mode. Returns the mode to the previous one. To return to the first mode, click while pressing the <Shift> key.

Move Mode Forward

Forwards the mode to the next one. To go to the last mode, click while pressing the <Shift> key.

Play Animation
View mode and phase in animation.
See [Play animation] for more information.

Mesh Diagram

Sets show or hide. If selected, mesh diagram is shown.

See [Mesh Diagram] for more information.

Gradation Contour Diagram

Displays the values set in the field type/vector components/complex number calculation with color gradation.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The color can be set on the [Contour ] tab .

See [Gradation Contour] for more information.

Isoline Contour

Displays the contour values set in the field type/vector components/complex number calculation at the specified interval. The default setting is equal spacing with 10 divisions.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The color and the interval can be set on the [Contour ] tab.

See [Isoline Contour] for more information.

Isosurface Contour

Displays the contour values set in the field type/vector components/complex number calculation at the specified interval. The default setting is equal spacing with 10 divisions.

This function is only available for the 3D model. Middle node of the element is not supported.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The color and the interval can be set on the [Contour ] tab.

See [Isosurface Contour].

Surface Vector

Displays the surface vectors of the values set in the field type/vector components/complex number calculation. This function is only available for the 3D analysis.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The vector's color and shape can be set on the [Vector] tab .

See [Vector Diagram] for more information.

Element Vector

Displays element vectors of the field type, vector components, and values set by complex number calculation.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The vector's color and shape can be set on the [Vector] tab .

See [Vector Diagram] for more information.

Streamline/Forceline

The streamlines/forcelines are displayed if the field is for the flow velocity, heat flux, electric flux density, and magnetic flux density.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The startpoints and the number of lines can be set on the [Streamline/Forceline] tab .

See the detail.

Displacement Outline

Selectable only in stress and piezoelectric analyses.

Shows the model's outline after deformation.

The scale is adjusted for visual understanding.

Please note the actual displacement could be much smaller than it appears.

Click [Graphics Setup] . [Graphics Setup] dialog box will appear. The scale can be set on the [Displacement ] tab .

See [Displacement Diagram].

Directivity in 3D

Displays the directivity in 3D.

See the detail.

Show Cross Section

Shows the cross section of model.

See [Cross Section].

Set up Cross Section

Sets up the cross section of model.

See [Cross Section].

Show Other Side

Turns the cross sectional direction to show he cross section and the surface at the same time. The surface of the other side will be displayed.

See [Cross Section].

Show Maximum and Minimum

Indicates the maximum and minimum values and locations for the specified field, vector components, etc.

If more than one of the same values exist, one of them will be selected at random.

See [Show Maximum and Minimum] for the detail.

Full Model

This function will be active when Reflective or Periodic is selected in the Edit Boundary Condition dialog box.

See [Full Model] for more information.

Graphics Setup

Sets up the graphics for field display. See [Graphics Setup] for more information.

Initialize Display Condition

Initializes the display condition.

Be aware that the results window settings will be initialized as well.

Edit or Add Fields

Edits displayable fields or adds fields based on the user-defined expressions.

Refer to [Select, Edit, or Add Fields].

Add to Results

Registers the current results display setting in "Results" of Project Tree.

See [Registering Results Display Setting].

Overwrite

Overwrites the existing results display setting with the current one in Project Tree.

See [Registering Results Display Setting].

Add to Results and Favorites

Register the current display setting in both "Results" and "Favorites" of Project Tree.

Setting Coordinate System

Shows the results in the set coordinate system.

See Setting Coordinate System for the details.