CAE Software【Femtet】Murata Software Co., Ltd.
A stylus is placed over a plate. The voltage across them generates uneven electric field.
The electric field and the equipotential map are solved.
Unless specified in the list below, the default conditions will be applied.
Item |
Settings |
Analysis Space |
3D |
Model unit |
mm |
Select “Static analysis” as the potential is static.
Item |
Settings |
Solvers |
Electric Field Analysis [Coulomb] |
Analysis Type |
Static analysis |
Material Type |
Dielectric material |
Options |
N/A |
Create the ambient air manually. Deselect the automatic creation.
Tabs |
Setting Item |
Settings |
Mesh Tab |
Ambient Air Creation |
Create ambient air automatically: Deselect |
A round-bottomed cylinder is placed inside the air cube.
The flat bottom of the cylinder is set to 1[V] and the bottom face of the air is set to 0[V].
Body Number/Type |
Body Attribute Name |
Material Name |
0/Solid |
Air |
000_Air(*) |
3/Solid |
Elec |
008_Cu * |
* Available from the Material DB
Boundary Condition Name/Topology |
Tab |
Boundary Condition Type |
Settings |
V0/Face |
Electric |
Electric wall |
Voltage specified, 0[V] |
V1/Face |
Electric |
Electric wall |
Voltage specified, 1[V] |
Outer Boundary Condition * |
Electric |
Magnetic wall |
|
To set Outer Boundary Condition, go to the [Model] tab
and click [Outer Boundary Condition] .
The vectors of the electric field are shown below.
The isosurface contour of the electric field is shown below.
The electric field is plotted along the Z axis below.
It is uneven around the head of the electrode.