Modeling

Title	Operation
00.Overview
01.Create a New Project
02.Create a Bottom Case	Box
03.Create a Hinge's Inner Cylinder	Cylinder
04.Create a Hinge's Outer Cylinder	Cylinder
05.Create a Top Case	Box
06.Create a Box in the Hinge	Box
07.Cut the Hinge's Cylinders	Cut
08.Remove the Outer Cylinder in the Middle	Delete
09.Modify the Top Case	Subtract (Boolean)
10.Modify the Top Case	Unite (Boolean)
11.Modify the Bottom Case	Subtract (Boolean)
12.Modify the Bottom Case	Unite (Boolean)
13.Rotate the Top Case	Rotate
14.Modify the Bottom Case	Subtract (Boolean)
15.Create Keys	Box Arrayed Copy
16.Create Keys	Box Arrayed Copy
17.Create a Center Button	Circle Extrude with Taper
18.Complete the Center Button	Cylinder Subtract (Boolean) Delete
19.Create an Opening for the Microphone	Track Extrude
20.Create an Opening for the Speaker	Track Extrude
21.Create a Display	Box
22.Fillet the Case Edges	Fillet
23.Fillet the Key Edges	Fillet