Home / Tutorial / Modeling / 02.Create the Bottom Case

02.Create a Bottom Case

Let's create a box for the bottom case.

On the [Model] tab, go to , click [Solid], and select [Box [Specify Length]] at the submenu.
Designate the startpoint. In the parameter input dialog box, enter Startpoint (X: 0, Y: 0, Z: 0) and click . Tips on the parameter input dialog box If the input value is 0, it is not required to enter 0. The blank is acceptable. Press the <Tab> key to hop around the items in the dialog box. Press the <Enter> key on to proceed to the next setting.
Set the width. Enter Width: 50 and click .
Set the depth. Enter Depth: 100 and click .
Set the height. Enter Height: 8 and click .
Click in the parameter input dialog box and exit. It is also possible to exit with the <Esc> key. The box is now ready.
To fit the model on the modeling window, go to the [Viewpoint Operation] tool panel and click [Fit] . See [Viewpoint Operation] for the details.
You can undo or redo the operation. The operations can be changed as follows; On the [Model] tab, go to and click [Undo] to undo the modeling or attribute operation, and click [Redo] to redo the modeling or attribute operation.